Cedar DWT-200 Digital Torque Tester for Manual Wrenches
The Cedar DWT-200 Digital Torque Tester for Manual Wrenches is ideal for checking torque on manual torque wrenches up to 200 Nm / 1,500 lbf-in with an accuracy of ± .5% F.S., ± 1 LSD. The tester features 3 measurement modes: Peak Down, Peak, or Real Time measurement modes and selectable units lbf-in, kgf-cm, N-m
Proprietary peak down capture mode Heavy duty metal construction lbf-in, kgf-cm, N-m selectable Peak Down, Peak, and Real Time measuring modes (selectable) Accuracy: 0.5% F.S. 1 LSD ( 32 to 100F) Clockwise operation 1/2? square drive and 3/8? square drive adapter Auto power off (after 10 minutes of non use) Runs on four AA batteries (about 20 hours continuous use) Optional vise mounting plate (AP-200V)
Measuring Direction
Clockwise ONLY
Accuracy
+/-0.5% F.S. ±1 LSD
Power
4x AA Batteries provide 20 hours of use
More Information
Product Specifications
Measuring Direction
Clockwise ONLY
Accuracy
+/-0.5% F.S. ±1 LSD
Power
4x AA Batteries provide 20 hours of use
Product Features
Proprietary peak down capture mode Heavy duty metal construction lbf-in, kgf-cm, N-m selectable Peak Down, Peak, and Real Time measuring modes (selectable) Accuracy: 0.5% F.S. 1 LSD ( 32 to 100F) Clockwise operation 1/2? square drive and 3/8? square drive adapter Auto power off (after 10 minutes of non use) Runs on four AA batteries (about 20 hours continuous use) Optional vise mounting plate (AP-200V)
Downloads
comming soon
