The Checkline PD765-7X5-00 - Trident Process & Temperature Digital Panel Meter, 1/8 DIN, CE, UL/C-UL is designed to work with Check-Line tension sensors providing a large, bright LED display of real-time tension values. It is easy to set up and permits flush panel mounting in a 1/8 DIN cutout. The PD765-6R3-20 offers 4-20 mA output for external recording and data-logging purposes. Hi/Lo limits and relay contacts can be optionally specified on PD765-6R5-10 supplied instead of the 4-20 mA analog output. The standard model PD765-6R3-20, operates from all worldwide AC-Power (85-265V AC). 0-10V DC output is not available.
Four front panel buttons, cloning with Copy feature, PC with MeterView or LavVIEW software and Modbus registers. Certified LabVIEW driver available.
Noise Filter
Programmable 2 to 199 (0 will disable filter)
Display Update Rate
Process/RTD
Overrange
Display flashes 9999
Underrange
Display flashes -1999
Recalibration
All inputs are calibrated at the factory; recalibration is recommended at least every 12 months.
Min/Max Display
Stored until reset by user or meter is turned off
Password
Restricts modification of programmed settings
Non-Volatile Memory
Settings stored for a minimum of 10 years
Power Options
85-265 VAC; 12-36 VDC
Required Fuse
UL Recognized, 5 A max, slow-blow; up to 6 meters may share one fuse
Normal Mode Rejection
64 dB at 50/60 Hz
Isolation
4 kV input/output-to-power line; 500 V input-to-output or output-to-24 VDC supplies. -6R5 models only
Operating Temperature
0 to 65°C
Storage Temperature
-40 to 85°C
Relative Humidity
0 to 90% non-condensing
Connections
Power & Signal
Enclosure
1/8 DIN, high impact plastic, 94 V-0, color
Weight
9.5 oz (269 g) (including options)
Warranty
3 years
Accuracy
±0.05% FS ±1 count; square root
Function
Linear or square root
Low-Flow Cutoff
0 to 9999 (0 disables cutoff function)
Decimal Point
Up to 3 decimals
Calibration
Scale without signal or calibrate with signal source
Calibration Range
User programmable over entire range of meter
Input Inpedance
Voltage range
Temperate Drift
±50 PPM/°C
Transmitter Supply
Isolated, one or two transmitter supplies
Rating
Form C (SPDT); rated 3 A @ 30 VDC or 3 A @ 250 VAC resistive load; 1/14 HP (?50 watts) @ 125/250 VAC for inductive loads such as contactors, solenoids, etc.
Deadband
0 - 100% FS, user selectable
High or Low Alarm
User may program any alarm for high or low
Relay Operation
1. Automatic (non-latching) 2. Latching 3. Pump alternation control
Relay Reset
User selectable via front panel buttons or PC 1, Automatic reset only (non-latching) 2. Automatic plus manual reset at any time (non-latching) 3. Manual reset only, at any time (latching) 4. Manual reset only after alarm condition has cleared (latching)
Automatic Reset
Relays reset when input passes the reset point
Manual Reset
Front panel button, MeterView, Modbus registers
Time Delay
0 to 199 seconds, on and off delays; programmable
Fail-Safe Operation
Programmable
Auto Initialization
When power is applied to the meter, relays will reflect the state of the input to the meter
Scaling Range
1.00 to 23.00 mA; reverse scaling allowed
Calibration
Factory calibrated 4.00 to 20.00 mA
Accuracy
±0.1% FS ±0.004 mA
Temperature Drift
50 PPM/°C Note
Isolation
500 V input-to-output or output-to-24 VDC supplies; 4 kV output-to-power line
Four front panel buttons, cloning with Copy feature, PC with MeterView or LavVIEW software and Modbus registers. Certified LabVIEW driver available.
Noise Filter
Programmable 2 to 199 (0 will disable filter)
Display Update Rate
Process/RTD
Overrange
Display flashes 9999
Underrange
Display flashes -1999
Recalibration
All inputs are calibrated at the factory; recalibration is recommended at least every 12 months.
Min/Max Display
Stored until reset by user or meter is turned off
Password
Restricts modification of programmed settings
Non-Volatile Memory
Settings stored for a minimum of 10 years
Power Options
85-265 VAC; 12-36 VDC
Required Fuse
UL Recognized, 5 A max, slow-blow; up to 6 meters may share one fuse
Normal Mode Rejection
64 dB at 50/60 Hz
Isolation
4 kV input/output-to-power line; 500 V input-to-output or output-to-24 VDC supplies. -6R5 models only
Operating Temperature
0 to 65°C
Storage Temperature
-40 to 85°C
Relative Humidity
0 to 90% non-condensing
Connections
Power & Signal
Enclosure
1/8 DIN, high impact plastic, 94 V-0, color
Weight
9.5 oz (269 g) (including options)
Warranty
3 years
Accuracy
±0.05% FS ±1 count; square root
Function
Linear or square root
Low-Flow Cutoff
0 to 9999 (0 disables cutoff function)
Decimal Point
Up to 3 decimals
Calibration
Scale without signal or calibrate with signal source
Calibration Range
User programmable over entire range of meter
Input Inpedance
Voltage range
Temperate Drift
±50 PPM/°C
Transmitter Supply
Isolated, one or two transmitter supplies
Rating
Form C (SPDT); rated 3 A @ 30 VDC or 3 A @ 250 VAC resistive load; 1/14 HP (?50 watts) @ 125/250 VAC for inductive loads such as contactors, solenoids, etc.
Deadband
0 - 100% FS, user selectable
High or Low Alarm
User may program any alarm for high or low
Relay Operation
1. Automatic (non-latching) 2. Latching 3. Pump alternation control
Relay Reset
User selectable via front panel buttons or PC 1, Automatic reset only (non-latching) 2. Automatic plus manual reset at any time (non-latching) 3. Manual reset only, at any time (latching) 4. Manual reset only after alarm condition has cleared (latching)
Automatic Reset
Relays reset when input passes the reset point
Manual Reset
Front panel button, MeterView, Modbus registers
Time Delay
0 to 199 seconds, on and off delays; programmable
Fail-Safe Operation
Programmable
Auto Initialization
When power is applied to the meter, relays will reflect the state of the input to the meter
Scaling Range
1.00 to 23.00 mA; reverse scaling allowed
Calibration
Factory calibrated 4.00 to 20.00 mA
Accuracy
±0.1% FS ±0.004 mA
Temperature Drift
50 PPM/°C Note
Isolation
500 V input-to-output or output-to-24 VDC supplies; 4 kV output-to-power line
Output Loop Resistance
24 VDC
Virtual Meter
Virtual Meter
Product Features
Can be scaled to any engineering units desired with user-set decimal point
4-20 mA analog output for recording and control purpose (No analog output provided on PD765-6R5-10)
Requires 85-265V AC Power, provides regulated power for the tension sensor
Hi/Lo Limits and relay contacts provided on PD765-6R5-10 (supplied instead of 4-20ma output)
User-set filters can be used to adjust signal sensitivity to reduce fluctuations of tension values