The Dakota Ultrasonics TI-MINIMAX Bolt Tension Monitor Meter Z-182-0002 Extensometer is a state of the art instrument designed to measure elongation produced by tightening a threaded fastener. The Dakota Ultrasonics TI-MINIMAX Bolt Tension Monitor Meter Z-182-0002 Extensometer can measure the elongation very accurately in fasteners of virtually any material from 1/2 inch to 4 feet in length. The measurement is achieved by determining the change in the transit time of an ultrasonic shock wave along the length of the fastener as the fastener is tightened by any method. The on-board microcomputer automatically interprets this time measurement to display the time(nanoseconds), elongation, load, stress, or %strain from stretching a fastener.
Set hi and lo tolerances with audible beeper, viewable scan bar, and visual LEDs
Data Logger (Internal)
Total of 8,000 readings, multiple bolt groups. Stores both waveform views, nanoseconds, elongation, load, stress, and strain for each reading
Memory
16 megabit non-volatile ram
Transducer
Single Element (1 to 10 MHz & 1/8" to 1" diameters)
Transducer Cable Lenght
10 foot (custom lengths available, inquire)
Temperature Probe
for automatic temperature compensation
Setup Memory
64 custom user defined setups. Factory setups can also be edited by the user
Kit Contents
The TI-MINIMAX is supplied as a kit including Gauge, 2 AA batteries, 4 oz. Bottle of Couplant, RS232 Transfer Cable, Lemo to DB9 M/F 10' Lemo to Microdot Transducer Cable, Windows Utility Software Carrying Case, Operation Manual. Probes/Transducers and Calibration blocks are sold separately
Set hi and lo tolerances with audible beeper, viewable scan bar, and visual LEDs
Data Logger (Internal)
Total of 8,000 readings, multiple bolt groups. Stores both waveform views, nanoseconds, elongation, load, stress, and strain for each reading
Memory
16 megabit non-volatile ram
Transducer
Single Element (1 to 10 MHz & 1/8" to 1" diameters)
Transducer Cable Lenght
10 foot (custom lengths available, inquire)
Temperature Probe
for automatic temperature compensation
Setup Memory
64 custom user defined setups. Factory setups can also be edited by the user
Kit Contents
The TI-MINIMAX is supplied as a kit including Gauge, 2 AA batteries, 4 oz. Bottle of Couplant, RS232 Transfer Cable, Lemo to DB9 M/F 10' Lemo to Microdot Transducer Cable, Windows Utility Software Carrying Case, Operation Manual. Probes/Transducers and Calibration blocks are sold separately
Product Features
The first cost effective ultrasonic solution available on the market
Visually compare the unloaded to the loaded waveform.
Display Options - RF, Rectified, Large Digits with Limits Bar
Effectively monitor your bolts during periodic shutdowns over the service life of the fastener
Measurement quanities - Time (nanoseconds), Elongation, Load, Stress, and %Strain
Display Resolution - 1/8" VGA 240 x 160 pixels
Stores 8000 readings and waveforms in multiple groups