DeFelsko KITPCFS3 PosiTest PC Powder Inspection Kit with PosiTector 6000 FS3 Advanced Body Ferrous Metals Coating Thickness Gauges
The DeFelsko KITPCFS3 PosiTest PC Powder Inspection Kit with PosiTector 6000 FS3 Advanced Body Ferrous Metals Coating Thickness Gauges is a complete solution for measuring powder coating before and after cure. Each kit contains: DeFelsko PosiTest PC Uncured Powder Thickness Gage, DeFelsko PosiTector 6000 FS3 Advanced Ferrous Coating Thickness Gage and Two DeFelsko Powder Combs (models 1 and 4).
PosiTector Advanced Gage Body PosiTector PC non-contact uncured powder thickness probe PosiTector 6000 coating thickness probe select from a variety of measurement ranges and probe styles 2 DeFelsko Powder Combs (models 1 & 4) with measuring ranges of 3 to 12 mils and 75 to 300 ?m Select from 4 pre-configured kits or build your own Build your own Powder Inspection Kit from a selection of probes to suit your needs PosiTector PC accepts all PosiTector probes easily converting from measuring uncured powder to cured dry film thickness, surface profile, and more. This simple. easy-to-use gage measures the thickness (height or depth) of applied dry coating powders in the pre-cured, pre-gelled state.
Range
20 - 110 µm (0.8 - 4.3 mils)
Resolution
1 µm (0.05 mils)
Accuracy
± 5 µm (± 0.2 mil)
Measurement Time
2 - 5 seconds
Measurement Distance to Powder
18 mm (0.75 inch)
Measurement Area
2 mm (0.08 inch)
More Information
Product Specifications
Range
20 - 110 µm (0.8 - 4.3 mils)
Resolution
1 µm (0.05 mils)
Accuracy
± 5 µm (± 0.2 mil)
Measurement Time
2 - 5 seconds
Measurement Distance to Powder
18 mm (0.75 inch)
Measurement Area
2 mm (0.08 inch)
Product Features
PosiTector Advanced Gage Body PosiTector PC non-contact uncured powder thickness probe PosiTector 6000 coating thickness probe select from a variety of measurement ranges and probe styles 2 DeFelsko Powder Combs (models 1 & 4) with measuring ranges of 3 to 12 mils and 75 to 300 ?m Select from 4 pre-configured kits or build your own Build your own Powder Inspection Kit from a selection of probes to suit your needs PosiTector PC accepts all PosiTector probes easily converting from measuring uncured powder to cured dry film thickness, surface profile, and more. This simple. easy-to-use gage measures the thickness (height or depth) of applied dry coating powders in the pre-cured, pre-gelled state.
Downloads
