The Horiba LAQUAtwin Na-11 Compact Sodium Ion Meter, # 3200689159 is the only pocket meter that directly measures sodium ion concentration in 0.3ml sample (or 0.05ml sample with sampling sheet B). Unique sensor allows measurement of viscous liquids, solids, and even powder samples. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the Horiba LAQUAtwin Na-11 flat sensor. This procedure saves you time and prevents wasting your precious sample.
85% or less in relative humidity (no condensation)
Power
CR2032 batteries (2)
Battery Life
Approx. 400 hours in continuous use without backlight
Material
ABS epoxy
Dimensions
164 x 29 x 20 mm (excluding projections)
Mass
Approx. 55 g (including sensor and batteries)
Functions
Auto Standard Recognition | Changeable High and Low Calibration Values | Multiplication Compensation | Temperature Calibration | Auto Hold / Auto Stable Measurement | Switchable Backlight | Automatic Power Off (30mins) | Low Battery Indicator | IP67 Dust/Waterproof | Replaceable Sensor
85% or less in relative humidity (no condensation)
Power
CR2032 batteries (2)
Battery Life
Approx. 400 hours in continuous use without backlight
Material
ABS epoxy
Dimensions
164 x 29 x 20 mm (excluding projections)
Mass
Approx. 55 g (including sensor and batteries)
Functions
Auto Standard Recognition | Changeable High and Low Calibration Values | Multiplication Compensation | Temperature Calibration | Auto Hold / Auto Stable Measurement | Switchable Backlight | Automatic Power Off (30mins) | Low Battery Indicator | IP67 Dust/Waterproof | Replaceable Sensor
Product Features
Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)
Up to 2 calibration points
Auto standard recognition: 150 & 2000ppm sodium (default)
Changeable high and low calibration values
Multiplication compensation: 0.01 to 9.90
Temperature and mV display
Temperature calibration: 5 to 40.0 C
Auto hold / auto stable measurement
Auto power off: 30 mins.
Low battery indicator
IP67 Rating dust & waterproof
Replaceable sensor
400 Hours battery life: continuous use without backlight
Material: ABS epoxy
Display: custom (monochrome) digital LCD with backlight
Operating conditions: 5 to 40 C, 85% or less relative humidity
Warranty: 2 years - meter, 6 months - sensor
Packed in handy carrying case
Supplied with 150 & 2000ppm sodium standards, 5 x sampling sheets B, 2 x CR2032 batteries, dropper, instruction and quick manuals
